|
Index
Latest Updates
Released version: 2.3.8
18/09/2007
Added support for DB2020 standalone flashing
Fixed DB2020 IMEI bug
Fixed BB5 USB flashing bug
Released version: 2.3.7
16/08/2007
Added support for SonyEricsson P1 flash and unlock
Released version: 2.3.6
09/08/2007
- Reduced DB2020 IMEI change credit usage
- Improved DCT4 boot enter method
Released version: 2.3.5
25/07/2007
Added DB2020 IMEI change function by patch for CID49,51 phones, consuming credits
Fixed Z310 unlock by FBUS cable
Released version: 2.3.4
17/07/2007
Added DCT4 ASIC11 IMEI change function by patch
Released version: 2.3.3
08/07/2007
Added BB5PM Auth function
Fixed DCT4Plus memory read speed on several phones
Fixed 1600b unlock
Fixed reset warranty on all DCT4 phones
Released version: 2.3.2
26/06/2007
Fixed BB5 APE flashing bug
Added function to set the UCP block size to 128k manually when flashing BB5 phones by dead USB or FBUS
Added support for Ericsson K618, W580, W660, W888
Released version: 2.3.1
24/06/2007
Fixed DB2010 unlock / flash bug without smartcard (jump in flash problem)
Fixed Ericsson W200 flashing, and unlocking problem
Fixed Nokia DCT4Plus IMEI change bug
Added Ericsson Z310 CID52 flash / unlock support
Added flashing support for latest Nokia BB5 phones (N76, 6110n and more)
Released version: 2.3.0
20/06/2007
Implemented Ericsson DB2020 CID49,51 unlock by patch
Fixed Z310 unlock
Added support for Ericsson W200, S500 unlock and flash
Added support for Ericsson DB2020 unlock by log with FBUS cable
Released version: 2.2.9
15/06/2007
Implemented new Ericsson DB2020 (all current CIDs) unlock feature This feature consists of 3 steps:
Step 1. Create and send a SIMLock sign request for a phone with Send LOG button
Step 2. After approximately 24-48 hours you can request the result with the Request LOG button
Step 3. If the SIMLock signing was successful, you can immediately activate the SIMLock area with the Activate button
Fixed DCT4 / DCT4Plus IMEI change feature for phones equipped with ST flash
Added support for Ericsson W610 phone
Released version: 2.2.8
09/06/2007
Added support for changing IMEI on all ASIC2 DCT4 / DCT4Plus phones on all versions, consuming credits You should have 500 credits when using this feature first time to acquire the rights to use this feature later. The 500 credits can be used for any operation
Fixed BB5 USB flashing problem
Fixed BB5 128k UCP flash support
Released version: 2.2.7
17/05/2007
Added support for unlocking BB5 RAP3G models (6630, 6680, N70, N90) yet only by FBUS cable
Added support for flashing Nokia N95 by USB cable
Released version: 2.2.6
09/05/2007
Added support for Ericsson K810 phone
Added support for Ericsson Z310 phone
Released version: 2.2.5
20/03/2007
- Added support for DB2020 CID52 conversion
- Added support for DB2020 CID52 flash, lock / unlock
- Added support for Ericsson Z558
- Improved server communication
Released version: 2.2.4
05/03/2007
- Added flashing support for Ericsson K320 model
- Added service check availability for DB2020 unlock
Released version: 2.2.3
05/03/2007
- Fixed Ericsson DB2020 CID51 FBUS flashing bug
Released version: 2.2.2
02/03/2007
- Fixed Nokia DCT-3 flash bug
- Added support for unlocking Ericsson EPOC phones
- Added support for Ericsson M608, W958, Z525, W830
Released version: 2.2.1
28/02/2007
- Fixed BB5 FBUS flash 128k UCP support
- Added support for Ericsson W880, K550 models
- Added support for flashing Nokia E65
Released version: 2.2.0
17/02/2007
- Added support for BB5 downgrade flash with FBUS cable
- Reworked flashing of Ericsson EPOC phones
Released version: 2.1.9
17/02/2007
- Added support for flashing Ericsson EPOC phones (M600, P990, W950)
Released version: 2.1.8
31/01/2007
- Added support for Nokia 6060 unlock
Released version: 2.1.7
9/01/2007
- Fixed DB2020 unlock with USB cable
Released version: 2.1.6
18/01/2007
- Added support for DCT4Plus unlock without credits
Released version: 2.1.5
16/01/2007
- Fixed UMTS FBUS unlock and flash support
- Added support for DB2020 GDFS download by USB cable, which doesn't take credit
- Added support for checking the necessity of SIMLock signing by USB cable without taking credit IMPORTANT: Due to the necessity of the DCU-60 USB cable during DB2020 unlock procedure we still recommend to EVERYONE to use USB cable for the whole operation For further instructions please refer to this manual
Released version: 2.1.4
16/01/2007
- Fixed WD2 flash, and RPL write support
Released version: 2.1.3
15/01/2007
- Fixed DB2020 flash, lock / unlock with FBUS cable
- Added feature to skip overwrite of security fields when writing GDFS
- CSCA activation availability check takes place before SIMLock signing, when USB mode is checked
Released version: 2.1.2
12/01/2007
- Added support for DB2020 CID51 flash, lock / unlock
- Fixed old smartcard phones (T230, T610) unlock
- Reworked DB2020 read info, this won't take credits any more
Released version: 2.1.1
12/01/2007
- Added check for SIMLock sign at DB2020 unlock, so if the program fails the second part of unlock, the first part can be skipped next time
- Added a feature that can warn you before credit usage, you have to activate this feature at Setup/General tab
- Added Nokia DCT-4, BB5 language read from INI file feature
Released version: 2.1.0
11/01/2007
- Fixed, and re-enabled Ericsson DB2020 unlock / lock
Released version: 2.0.9
|30/11/2006
- Temporary disabled Ericsson DB2020 unlock / lock
- Fixed flash / unlock of UMTS phones
Released version: 2.0.8
25/12/2006
- Added support for Ericsson DB2020 unlock / lock. To unlock DB2020 phone you need to have a DCU-60 cable, install the USB flash and device manager driver the drivers are included in the important file package, so it is downloaded to your UniFilesEricssonDrivers directory during self update. To install the USB flash driver you have to disconnect the cable, turn off the phone and connect the DCU-60 cable while pressing the C button. You can find the USB flash driver at UniFilesEricssonDriversGordons Gate directory. To install the device manager driver you have to disconnect the cable, turn on the phone and connect the DCU-60 cable. You can find the device manager driver for the K800 at UniFilesEricssonDriversK800 directory
- Added support for usb unlocking / flashing with DCU-60 cable by smartcard the DB2020 unlock consists of two parts, for the first part you can do by DCU-60, or FBUS cable via UniversalBox, for second part DCU-60 cable is needed, so we recommend to use USB mode from the start to avoid changing cables during unlock
Released version: 2.0.7
30/11/2006
- Added support for Nokia BB5 USB 128k UCP flashing
Released version: 2.0.6
21/11/2006
- Fixed Nokia DCT-4 NAND flash (6230i PPM / UCP) bug
Released version: 2.0.5
20/11/2006
- Improved DCT-4 Plus detection
Released version: 2.0.4
16/11/2006
- Fixed an issue when flashing/unlocking ASIC11 with Enable FTP checked, the phone dies
Released version: 2.0.3
15/11/2006
- Fixed unlock after PM write
- Added new DCT-4 Product code information
- Fixed DCT-4 read simlock info from phone
Released version: 2.0.2
14/11/2006
- Added Nokia DCT-4 Plus (1110i, 1112, 2310, 2610) unlock feature, currently for 12 credits
Released version: 2.0.1
03/11/2006
- Added Nokia DCT-4 ASIC2 new software (1100, 1600, 2300, 2600) unlock feature
Released version: 2.0.0
01/11/2006
- Fixed Ericsson W550 loader error
- Added support for OneNAND flash chips, so W900 can be flashed without smartcard again
- Added support for compressed UGDFS files
Released version: 1.9.9
27/10/2006
- Added support for AMD flash chips, so LG page is enabled again
- Fixed read/write GDFS feature with smartcard
- Added make important GDFS values after flash feature. This will do the selected jobs on the GDFS page after flash
Released version: 1.9.8
19/10/2006
- Added automatic BROWN49 to RED conversion on DB2010 models
- Added Reset user code feature on DB2020 models
- Added Download/Upload GDFS image feature on DB2000 and DB2010 models
- LG and W900 flashing without smartcard is not supported yet, due to new ONENAND, and AMD flash chips
- However W900 flashing is available with smartcard, the LG page is temporary disabled until these flash chips will be supported
- Fixed DB2010 BROWN36 flashloader, to work with K300, J300, and K750 correctly
Released version: 1.9.7
17/10/2006
- Fixed several problems, and mistakes like:
- K600,V600,V800,W900,K750 preloader was missing
- Several DEFAULT.CUS file were missing
- RED36, RED37 to BROWN conversion fixed
Released version: 1.9.6
16/10/2006
- Heavily reworked our Ericsson UMTS support. We have implemented new loader which helps us to extend functionalities in the future. Because of this we will be able to add support faster. Currently added functions with this feature:
- IMEI patch software on the fly
- IMEI write without testpoint
- Automatic flash restore on newer flash types (intel control flash)
Released version: 1.9.5
14/08/2006
- Added support for Nokia N93 FBUS flashing
Released version: 1.9.4
11/08/2006
- Added support for flashing latest BB5 models, screenshots here
- When selecting new DCT-4 model, the PM selection checkbox unchecks itself
Released version: 1.9.3
08/08/2006
- Added Ericsson W300, W700, Z550 flashing, and unlock support
- Fixed warranty reset bug on several ASIC2 phones
- Implemented Nokia 1600 new version phone unlock
- Added ability to write only flash checksum from RPL file
Released version: 1.9.2
10/07/2006
- Added Ericsson K800, K610 (DB2020) flashing support with SmartCard. This is only a minor Ericsson update, further Ericsson update is coming in about two weeks
Released version: 1.9.1
07/07/2006
- Implemented Nokia DCT-4 RPL calculation, and IMEI repair function online, and realtime. You can find information about credit costs here
Released version: 1.9.0
22/06/2006
- Implemented new SMCU boot algo. New version software is needed to update boot
Released version: 1.8.9
06/06/2006
- Improved logging system
- Fixed DCT-4 ASK format error due to ASIC2 intel.fia loader
- Added BB5 PP file upload support
Released version: 1.8.7
30/05/2006
- Added Nokia DCT-4 after flash process functions: Reset warranty, and Upload PM
- Improved Nokia BB5 Format user area function
- Changed Nokia DCT-4 ASK file generation to new format
- Improved MMC card functions. Now you can lock/unlock card with password, and read card info.For the enhanced functions new page added for MMC card maintenance, under Misc tab
Released version: 1.8.6
25/05/2006
- Added Nokia BB5 USB flash support. Dead USB flashing also supported on models where available (Screenshots are available here ) (We still find FBUS flashing more reliable, because dead USB flashing is not supported on every models, and flashing with USB cable you always have to flash MCU file too. So we recommend you to get FBUS cables for each phone
- Added Nokia BB5 ADSP flash support on FBUS
Released version: 1.8.5
05/05/2006
- Added support for latest Nokia BB5 phones (6131, N80, N91)
Released version: 1.8.4
28/04/2006
- Fixed Nokia BB5 flash bug due to 6280 AMD flash chip support
Released version: 1.8.3
27/04/2006
- Added support for Nokia BB5 6280 with AMD flash chip. (To repair an already flashed 6280 you only need to flash the UCP again. This will fix empty gallery problem)
Released version: 1.8.2 at 25/04/2006
- Added Ericsson Z530, W810 flashing support with SmartCard. Unlock also available, but you have to flash the phone after unlock (after unlock you have to flash the software only by selecting Use SmartCard checkbox, this won't reduce credit) (in the future flashing will be available without SmartCard)
Released version: 1.8.1
20/04/2006
- Fixed Ericsson UMTS flash, and unlock bugs due to CID49 support
- Added server selection ability
Released version: 1.8.0
19/04/2006
- Fixed Ericsson UMTS filesystem initialization bug
- Added Ericsson UMTS CID49 flash support without SmartCard
Released version: 1.7.9
10/04/2006
- Fixed the recognition of new hardware boxes
Released version: 1.7.8
04/04/2006
- Added Ericsson W900, K600, W550, W600 CID49 unlock support without testpoint, with automatic flash restore
Released version: 1.7.7
15/03/2006
- Added Ericsson W550/W600 CID49 unlock support without testpoint
- Added DCT-4 information on hardware version (with this you can check if 6230i has new hardware)
- Improved flashing speed on Nokia, and Ericsson phones
- Fixed several minor bugs
Released version: 1.7.6
17/02/2006
- Added Ericsson CID49 change important GDFS values by SmartCard
Released version: 1.7.5
17/02/2006
- Fixed visibility bug at 1024*768, or smaller resolutions
- Added clear result window checkbox
- Added load files on startup checkbox
- Added Nokia flash manufacturer info
- Added Nokia DCT-4 poll unlock function
Released version: 1.7.4
06/01/2006
- Added LG 3G flash, unlock, and IMEI change support, for several models. More models are coming
- Added DCT-4 read lockinfo button
- Added DCT-4 Save RPL function
- Fixed 6270 new version file load bug
- Fixed SPC, and XTKSL code displaying bug
- Fixed several minor bugs
- Added messaging system
- Improved Ericsson skip software patch checkbox, now automatically reloads the main file
Released version: 1.7.3
06/01/2006
- Fixed Nokia validity patch (Contact Service patch) for 6610i, and 7250i
- Improved write RPL function. Only starts writing RPL if external power connected, because some models need 5 Volts for RPL writing
- Fixed Nokia flash file loading. On some models PP file didn't loaded, bacause of the location of it
Released version: 1.7.2
04/01/2006
- Re-enabled write RPL function
- Added Nokia phoenix directory selection feature on setup/general tab
Released version: 1.7.1
29/12/2005
- Added MMC card unlock feature, using RJ45-MMC adapter cable
Released version: 1.7.0
28/12/2005
- Fixed Nokia DCT-4 IMEI patch bug
Released version: 1.6.9
27/12/2005
- Added Nokia DCT-4 validity patch for 6610i, and 7250i
Package Contains:
- Universal Box 2.1
- Free 100 Credits
- 5 cables
|
|
